Welcome to T R A N S P R O





		Sikkens PRODUCTS




		Autocoat BT 300MM / RM

		High quality two pack, medium solid polyurethane topcoat for first time finishing and refinishing of buses, commercial vehicles and equipments available via a mixing machine or as ready mixed colours.

		Autocoat 120 Basecoat

		BT 120 Basecoat is designed to produce solid, pearl and metallic colours. It can be used for new work and refinishing system of commercial vehicles

		300 Clear ASG

		High build two pack medium- solid clearcoat designed to achieve the optimum scratch and grafitti, resistance.

		300 Clear

		Autocoat BT 300 clear is a 2k polyurethane clearcoat which renders a superb appearance in combination with autobase in a two coat system. It can be applied wet on wet on Autocoat BT to maximize resistance to chemicals and for better gloss retention.

		LV Monocoat D5

		Autocoat BTLV450 Monocoat DS is a two pack chromate free semi gloss-primer-finish, designed for all kinds of steel constructions where excellent corrosion resistance and limited gloss is required. Autocoat BTLV 450 is available in many standard colours and does not contain isocyanate.

		300 Filler Beige – Gray

		Autocoat BT 300 filler is a high build fast drying two pack filler for new work and refinishing system of commercial vehicles. This product can be used as either sanding or non sanding filler and is available in Beige and gray colour.

		LV 250 Primer EP

		Quick drying chromate free and VOC complaint. High solid two pack epoxy primer surfaces for shot blasted steel substrates like chassis. The VOC of the ready to spray mixture is below 540 grams per liter at spraying viscosity. Is available in beige and gray colours.

		LV 350 Antistatic Silicon Remover

		Autocoat BT 350 antistatic silicon remover is specially suited for the removing of silicon oils and has antistatic properties. It is also suitable for cleaning and degreasing of old paint coatings, including thermoplastic acrylic finishes.It has a flashpoint above 21°C

		Autocoat BT 100 polyester putty

		Silicon Autocoat BT 100 polyester putty Two component quick drying , fine pigmented polyester putty for general use in refinishing cars. Excellent filling properties and easy sanding .

		Kombi fillers

		Fine textured knifing filler for filling minor flaws and scratch marks in cars and commercial vehicles. Designed for new work as well as for repairs.

		Poly fiber

		Two component glass fibre reinforced bridging filler for repair of rusted through areas on car and commercial vehicles. It can be used for quick and effective repair of holes upto 6cm in diameter

		WB 450 primer IP

		Fast drying water base chromate free one pack primer containing corrosion inhibitive pigments designed for chassis frames, containers

		Isonatic AQ

		Mono component and acqueous emulsion copolymer based coating for reinforced anti vibration and sound proofing protection

		Spot sealer direct to metal

		Quick drying universal one pack primer aerosol suitable for use directly on metal substrates


		Totalseal PRODUCTS			top



		FLOOR BONDING

		Floor bonding using conventional fixed rigid fasteners is labours intensive and allows moisture ingress into wood causing delamination. Rigid fixtures also allow direct transmittance of vibration and noise through the floor.
		BENEFITS:Totalseal 34,35,55 provide a flexible elastic seal, which can withstand vibration, shock loads and thermal expansion between a wide variety of substrates. Totalseal has good chamical resistance and can withstand elongation and distortion.

		PANEL BONDING

		Conventional fixings of side panels require many mechanical fastenings which is labour intensive during production. In service these fixings can cause problems of deterioration, vibration and corrosion.
		BENEFITS: Totalseal 34,35,42,55 allow for rapid fixing of side panels with minimal clamping and assembly. Totalseal is easy to apply and in service reduces friction, by absorbing thermal shock and movement, preventing galvanic corrosion. Totalseal allows you flush panel fixing giving pleasing aesthetic smooth lines to the exterior of the vehicle, whilst affording a watertight seal.

		SEAM SEALING

		Water ingress has long been a problem in the automotive, bus, coach and train industry. A water leak is a potential problem of corrosion and long term costly repair.
		BENEFITS:Totalseal 34,38,39,45,55 flexible seam sealants when used in all interior and extrior panel joints not only eliminates treditional fixings and riverts, but when cured, Totalseal becomes a permanent fixible rubber seal and an econamic way to produce a wetertight seal.

		ROOF BONDING

		Materials commonly used for the construction of vehicle roofs are a metal framework of usually aluminium alloy or steel, with sheets of aluminium or GRP fixed directly to the framework. These structures can reach very high temperatures and traditional fixing methods must accommodate both thermal and structural movement. In addition mechanical fixings require drilled holes which increase the risk of water leakage.
		BENEFITS:Totalseal 34,42 elastic bounding technologyallows ease of a roof structure without the need for drilling and mechanical fixing of the watertight skin. The thermal movement is taken up by the Totalseal elastic adhesive with minimum stress being applied to the bond face or substrate, eliminating vibration or thermal breakdown.

		GRP BONDING

		Due to the coefficients of expansion when fixing to two different substrates in vehicle body construction, e.g. GRP to metal, GRP to glass, a product must be used to withstand both thermal shock and impact absorption.
		BENEFITS:Totalseal 34, 35, 42, 55,100,180,200 products offer a solutioin to any combination of product fixing, high elongation, good adhesion, gap filling and suprior sealing performance. Totalseal can withstand vibration, shovk loads and thermal expansion between a varietyof substrates. Totalseal has good chemical resistances, can withstand elongation and distortion and can be overpainted.
		DIRECT GLAZING

		The process of bonding glass into the vehicle body aperture on front, rear and side glasses to offer a watertight flexible seal between glass and body is now accepted as the industry standard, giving torsional strength and safety in glassinstallation.
		BENEFITS: Totalseal 100, 180, 185,200 polyurethane adhesives for direct glazing are specially designed to meet the road vehicle safety crash and rollover test for passengers; compenstates on fitting tolerances; water leak elimination; dampening of drag increases fuel saving, meaning lighter weight vehicles with more scope for aerodynamics and cost effective installation.

		STRUCTURAL BONDING

		If a more rigid fixing method is required to offer structural strength and integrity when fixing metal to metal, or other substrates, a rigid adhesive is required.
		BENEFITS: Totalseal 42 and Axiom acrylic 2 component structural adhesive, offer extermely high bond strength to all surfaces and a rapid cure mechanism.

		LUGGAGE & DOOR ASSEMBLY

		In the assembly of doors and luggage compartments, traditional fixings between different substrates can cause vibration and noise problems. This can lead to distortion between panels and costly rectification.
		BENEFITS:Totalseal 34,42 offer a flexible bonding solution to eliminate movement and vibration when assembled onto the vehicle. In years of services they helpto reduce impact and stress forces on door and luggage compartment mechanisms.

		COSMETIC FINISHING

		Traditional seam sealing in joints can move after application and dry out, leaving unsightly cracks in the paint surface. After some time this allows water ingress, corrosion and eventual panel removal, resulting in costly replacement.
		BENEFITS: Totalseal34,35,39 for flexible movement in seam sealing where expansion and contraction take place in panel joints, therfore reducing costly repairs and repainting.

		MOULDING AND TRIM FINISHING

		To eliminate traditional fixings when fastening rubber moulding and trim finishing strips to the vehicle body.
		BENEFITS:Totalseal 34,35,42 can be used as a flexible adhesive to bond all rubbewr, EPDM and plastic finishing trims to all surfaces, allowing for permanent fixing without screws.

		ANCILLARY PRODUCTS

		Totalseal also offer a range of:

			Cleaning Solvents.
			Primers and Activating Chemicals for Adhesion Promotion.
			Contact Adhesive for Trim and Floor Coverings.
			Fastak Spray Contact Adhesive.
			Instant Expanding Polyfoam.
			Pre-Formed Butyl non-setting Mastic.
			Handy Wipe Cleaning Cloths.
			Plastic Repair Kit, etc.



		Meguiar’s PRODUCTS			top



		Rich SudsCar Wash

		Rich Suds car wash contains rich ingredients that produce long lasting suds that protect & enhance the finish as you wash.

		Diamond Cut Compound

		Diamond cut compound is a super fast cutting cleaner designed to remove sanding marks quickly.

		Dual Action Cleaner

		Dual action cleaner polish combines effective abrasive cleaners with pure rich polishes to produce a deep gloss shine.

		Speed Glaze

		Speed glaze is one step cleaner and polish that provides protection to a fresh paint finish.

		All Metal Restorer

		All metal restorer is an extra easy-to–use highly effective treatment for all metal wheels and metal trim. It dirt and other contaminants and adding tough, long-lasting protection.

		Natural Shine Vinyl & Rubber Protectant

		Natural Shine Vinyl & Rubber Protectant leave an artificial plastic or greasy look, brings back the original natural finish and create a perfect, “Like New” shine.

		Car Odor Eliminator

		Meguiar’s car odor eliminator is a fast acting extra strength formula that safety and permanently removes the toughest odors from car interiors.

		Endurance Tire Gel

		Endurance tire gel is a significant advancement in the protection technology that lasts week longer than ordinary protectants and stops tires from turning brown.